Planmeca Compact i5 User Manual Download Page 20

Page: 20 / 326

7 For your safety

7.1 Safety precautions

WARNING

No modification of this dental unit is allowed.

WARNING

Only instruments or equipment approved by Planmeca may be connected to

this dental unit.

WARNING

Do not simultaneously touch the patient and the PC.

WARNING

Do not simultaneously touch the patient and the USB ports, or any electrical

connectors of external instrument modules.

WARNING

Do not touch the patient when opening the cuspidor door or when the

cuspidor door is open.

WARNING

Maintenance procedures shall not be performed while equipment is in use

with a patient.

WARNING

The patient must not be in contact with instruments when the patient is

resuscitated with a defibrillator.

7 For your safety

10 Planmeca Compact i

User's manual

Summary of Contents for Compact i5







































































































































































































































































































































Search results

Summary of Contents for Compact i5

Reviews:

Related manuals for Compact i5

Brands by name

Popular brands

Planmeca Compact i5, User Manual

Search results

Summary of Contents for Compact i5

Reviews:

Related manuals for Compact i5

Brands by name

Popular brands