Planmeca Compact i5 User Manual Download Page 47

Page: 47 / 326

10 Instrument system

10.1 Delivery arms

10.1.1 Over-the-Patient (OP) delivery arm

The OP delivery arm is attached to the top of the dental unit and swings over

the chair.

CAUTION

Do not lean on the OP delivery arm.

CAUTION

Do not allow the patient to grab the OP delivery arm when getting seated or

up from the patient chair.

The instrument console can be positioned using the handles on the console.

The rotation area of the delivery arm is presented in the illustrations below.

The items do not need to be locked into position.
The following presents the OP delivery arm with balanced instrument arms.

10 Instrument system

User's manual

Planmeca Compact i 37

Summary of Contents for Compact i5







































































































































































































































































































































Search results

Summary of Contents for Compact i5

Reviews:

Related manuals for Compact i5

Brands by name

Popular brands

Planmeca Compact i5, User Manual

Search results

Summary of Contents for Compact i5

Reviews:

Related manuals for Compact i5

Brands by name

Popular brands