5. Press OK.
The pop-up window closes.
25.6 Bowl rinse and cup fill
25.6.1 Adjusting cup fill and bowl rinse flow rates
The flow rates of the bowl flush and cup fill can be adjusted with the two
black knobs located inside the dental unit.
When you have adjusted the flow rates, you might need to adjust the
duration of the bowl rinse and cup fill. For instructions, see sections
"Duration of bowl rinsing" on page 192 and "Duration of cup filling" on page
192.
25.6.2 Duration of bowl rinsing
Steps
1. Press Program.
2. Press Bowl rinse.
A pop-up window opens.
3. Adjust the duration of the bowl rinsing.
The minimum value is 5 seconds and the maximum 240 seconds, and it
is adjusted in steps of 5.
4. Press OK.
The pop-up window closes.
25.6.3 Duration of cup filling
About this task
NOTE
By default, the cup fill is not activated unless the cup is positioned in its
place under the cup fill tube. To change this setting, contact your Planmeca
dealer.
NOTE
The water in the dental unit is intended for rinsing only, not for drinking.
25 Programming
192 Planmeca Compact i
User's manual
Summary of Contents for Compact i5
Page 1: ...PlanmecaCompact i5 user s manual EN 30011782...
Page 10: ...Table of contents Planmeca Compact i User s manual...
Page 325: ......
