Planmeca Compact i5, User Manual

Page: 125 / 326

• Latvian
• Lithuanian
• Estonian
3. Select a language by pressing it.
Move up and down on the list by pressing the up/down buttons.
The list of languages closes and the language of your choice is
displayed on the control panel.
22.2 Bowl rinse
Control panel on instrument console: Press Bowl rinse to rinse the bowl.
Bowl rinsing can be stopped before it stops automatically by pressing Bowl
rinse again.
Control panel on Flexy-holder: Press Cup fill / Bowl rinse to rinse the bowl.
Bowl rinsing can be stopped before it stops automatically by pressing Cup
fill / Bowl rinse again.
The flow rate of the bowl rinse can be adjusted by turning the black knob
inside the unit, see section "Adjusting cup fill and bowl rinse flow rates" on
page 192.
The duration of bowl rinsing can be programmed, see section "Duration of
bowl rinsing" on page 192.
22.3 Cup fill
NOTE
By default, the cup fill is not activated unless the cup is positioned in its
place under the cup fill tube. To change this setting, contact your Planmeca
dealer.
NOTE
The water in the dental unit is intended for rinsing only, not for drinking.
Control panel on instrument console: Press Cup fill and the unit will
automatically fill the cup and then rinse the bowl. Cup filling can be stopped
before it stops automatically by pressing Cup fill again.
If Cup fill is pressed and held for longer than 1 second, water flows for as
long as the button is pressed, and the bowl is not rinsed.
Control panel on Flexy-holder: Press Cup fill / Bowl rinse twice or press the
button once until the cup filling starts (0.5 - 1 sec.) and the unit will
automatically fill the cup and then rinse the bowl. Cup filling can be stopped
before it stops automatically by pressing Cup fill / Bowl rinse again.
If Cup fill / Bowl rinse is pressed and held for longer than 1 second, water
flows for as long as the button is pressed, and the bowl is not rinsed.
22 Operating dental unit
User's manual Planmeca Compact i 115