Planmeca Compact i5 User Manual Download Page 41

Page: 41 / 326

8.8.2 Cuspidor

There are three optional USB ports on the cuspidor.

1. USB port for connecting the intraoral scanner
2. USB port for connecting the intraoral camera or for USB memory stick

Connect only intraoral cameras supplied by Planmeca to the USB port.

3. USB port for charging the tablet

8.9 Water and air quick-connectors

The water and air quick-connectors can be used with external devices.

When you connect a device to the quick-connector, water/air flows to the

device.
The water and air quick-connectors are located at the rear of the unit base.

8 Planmeca Compact i dental unit

User's manual

Planmeca Compact i 31

Summary of Contents for Compact i5







































































































































































































































































































































Search results

Summary of Contents for Compact i5

Reviews:

Related manuals for Compact i5

Brands by name

Popular brands

Planmeca Compact i5, User Manual

Search results

Summary of Contents for Compact i5

Reviews:

Related manuals for Compact i5

Brands by name

Popular brands