NOTE
Alternatively, the dental unit can be configured so that the chair moves to the
preprogrammed rinsing position when you press the Flexy button. Contact
your Planmeca dealer.
NOTE
The unit can be set up so that the Rinsing position indicator light goes off
and the previous position is not stored when you are driving from the rinsing
position to a preprogrammed position. Next time you press Rinsing position,
the chair will move to the rinsing position. Contact your Planmeca dealer.
NOTE
Automatic cup fill and bowl rinse functions when the dental unit reaches the
rinsing position are configurable; contact your Planmeca dealer.
NOTE
The water in the dental unit is intended for rinsing only, not for drinking.
20.2.5 Stopping chair movements
To stop the chair from moving before it reaches the preprogrammed
position, either press anywhere on the control panel display, press any chair
button on the Flexy-holder, push the foot control pedal or the centre knob in
any direction, or press the foot control handle.
The chair movement stops also when the stop plate is pushed or when the
backrest is pressed upward. The chair can be driven normally after the
possible obstruction has been removed.
1. Stop plate
2. Backrest
20 Operating patient chair
User's manual
Planmeca Compact i 109
Summary of Contents for Compact i5
Page 1: ...PlanmecaCompact i5 user s manual EN 30011782...
Page 10: ...Table of contents Planmeca Compact i User s manual...
Page 325: ......
