Planmeca Compact i5, User Manual

Page: 295 / 326

Foot control related error messages
ERROR
CODE
EXPLANATION
E52.1 Incompatible wireless foot control receiver software.
E52.2 Incompatible wireless foot control software.
E52.3 Incompatible foot control software.
E53 Foot control data error (cable short circuit).
E54.0 Foot control error.
E54.1 Foot control EEPROM write failure.
E54.2 Foot control EEPROM read failure.
E54.3 Pedal too far from sensors, channel A.
E54.4 Pedal too far from sensors, channel B.
E54.5 Sensor plate is tilted too much to either side, checksum error.
E54.6 Sensor plate is too close to PCB, channel A.
E54.7 Sensor plate is too close to PCB, channel B.
E54.8 Foot control re-trigger error.
E54.9 Foot control calibration error.
E55 Wireless foot control connection lost.
32.3.8 Operating light related error messages
Operating light related error messages
ERROR
CODE
EXPLANATION
E56 Operating light erroneously connected or short circuit in push
button.
E57 Incompatible SingLED software.
E58 Operating light bulb burned out.
Replace bulb.
32.3.9 Separator system related error messages
Separator system related error messages
ERROR
CODE
EXPLANATION
E59.1 Separator reports functional error.
Refer to Metasys separator documentation.
E59.2 Separator reports functional error.
Refer to Dürr separator documentation.
E60 Separator is not responding or separator cable is faulty.
E61 Separator is flooded with too much water.
E62 Newly attached separator is of new type and cannot be
controlled by MCB.
32 Help and error messages
User's manual Planmeca Compact i 285