From operating light
From both handles
When the light is on (and composite mode off), press and hold both handle
buttons simultaneously to toggle between the three colour temperatures
warm, neutral and cool.
You will hear a signal tone when you toggle the colour temperature from the
handle buttons.
From dental unit
You can change the light tone by pushing the left-side or the right-side knob
up, if this function has been configured to the foot control. To configure the
function, contact your Planmeca dealer.
Alternatively, you can change the light tone by pressing the Flexy button, if
this function has been configured to the Flexy button. To configure the
function, contact your Planmeca dealer.
You can also change the light tone in the programming window, see section
"Colour temperature and brightness" on page 195.
22.7 Planmeca Solanna Vision camera
Prerequisites
•
Planmeca Romexis software version 6.0 or later must be installed. When
Planmeca Romexis is running, the camera is continuously connected to
the software.
•
Planmeca Romexis and the dental unit have been paired by a Planmeca
service technician.
•
The connection between Planmeca Romexis and the dental unit has
been enabled by a Planmeca service technician.
Solanna Vision button
The Solanna Vision button on the control panel features indicators for video
streaming and recording, as well as an indicator light for each camera to
mark the status of the camera.
22 Operating dental unit
126 Planmeca Compact i
User's manual
Summary of Contents for Compact i5
Page 1: ...PlanmecaCompact i5 user s manual EN 30011782...
Page 10: ...Table of contents Planmeca Compact i User s manual...
Page 325: ......
