PerkinElmer OilExpress 4 User Manual Download Page 47

Page: 47 / 152

Overview of the OilExpress 4 System . 47

The sample shuttle is powered using the same 18 V power supply adaptor as the

spectrometer. A power splitter connected to the power adaptor port on the rear of the

Spectrum Two extends round the front of the spectrometer and connects to the front of the

sample shuttle (Figure 26).

Figure 26 Power connector on the front of the sample shuttle

When connected to the mains power, the instrument will initialize and will then be ready to

communicate with the PC. This will take approximately 2 minutes. During the initialization

procedure the diagnostic LED on the rear of the instrument is yellow indicating that the

instrument is running a series of self-checks. At the end of the initialization period, the

diagnostic LED will flash orange. The sample shuttle will also initialize, and the shuttle will

move. When the spectrometer is on the Power ON LED on the front of the instrument will be

lit green.

The spectrometer is connected via a USB connection (Figure 27) to a powered USB hub,

which is in turn connected to the PC running OilExpress 4.

Figure 27 USB 2.0 cable connector and USB port

NOTE: DO NOT connect the USB cable, or the powered hub, to the USB expansion card

installed in the PC for the (optional) Ultrasonic Liquid Level Sensor bar.

USB port

USB 2.0 cable spectrometer

connection

Summary of Contents for OilExpress 4

























































































































































Search results

Summary of Contents for OilExpress 4

Reviews:

Related manuals for OilExpress 4

Brands by name

Popular brands

PerkinElmer OilExpress 4, User Manual

Search results

Summary of Contents for OilExpress 4

Reviews:

Related manuals for OilExpress 4

Brands by name

Popular brands