10 . OilExpress 4 System User's Guide
OilExpress 4 Oil Condition Monitoring Systems
The OilExpress 4 Oil Condition Monitoring Systems (Figure 1) are optimized for the high-
throughput FT-IR analysis of in-service lubricant samples for additive depletion,
contamination and degradation.
Figure 1 The OilExpress 4 System
The OilExpress 4 system comprises the following key components.
•
A liquid autosampler (available with two sampling capacities), and associated labware
(injection station, sample racks and tip boxes).
•
A Spectrum Two FT-IR spectrometer, fitted with a sample shuttle and a water-resistant
flow cell.
•
A fluid control module (FCM).
For additional throughput, a second spectrometer (and associated FCM) can be incorporated
in OilExpress 4 DUO systems.
NOTE: A single-spectrometer system can be upgraded to a DUO system. Refer to
on page 141 or contact your PerkinElmer Customer Care
Representative for more information.
The system is controlled by the dedicated oil analysis software, OilExpress 4.
For information about oil analysis, refer to
Introduction to Oil Analysis by Infrared
on page 11.
Summary of Contents for OilExpress 4
