Omron GX-AD0471, User Manual, Page: 63 / 394

4 - 15
4 Installation and Wiring
GX-series EtherCAT Slave Unit User’s Manual
4-4
Con
n
ect
ing
an Ext
er
n
al Dev
ice
4
4-
4-2 C
onnecting to
e-CON Co
nnect
or
Ter
m
ina
ls
 Using Tyco Electronics, Sumitomo 3M or Panasonic Electric Works
connectors
Cables of connected devices are normally cut in semi-strip or strip specification as shown in the next
figures.
When the cables are prepared this way, an e-CON connector cannot be attached. First cut the end
and remove the cable sheath as shown in the following diagram. (Do not strip the sheaths of the
core wires.)
 Using OMRON connectors
Align the cable with the STRIP GAUGE described on the side of the connector. Remove 7 to 8 mm
of the wiring sheath, and twist the exposed wires several times.
Processing external devices cables
Semi-strip specification Strip specification
20 mm min.
Core wires
Strip sheaths of core wires
7 to 8 mm