manualshive.com logo in svg

Omron GX-AD0471, User Manual, Page: 391 / 394

Share
Download
Omron GX-AD0471 User Manual Download Page 391

Revision-1

GX-series EtherCAT Slave Unit User’s Manual

Revision History

A manual revision code appears as a suffix to the catalog number on the front cover of the manual.

The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.

Revision code

Date

Revised content

01

August 2010

Original production

02

September 2010

Added Encoder Input Slave Units GX-EC02xx.

03

July 2011

Added functions for change to unit version 1.1 and corrected errors.

04

November 2013

Added descriptions and corrected mistakes.

05

July 2016

Added GX-ILM08C IO-Link Master Unit.

06

October 2016

Corrected mistakes and added information on IO-Link Master Units.

07

October 2017

Made changes accompanying the upgrade of the IO-Link Master Unit to unit 
version 1.1.

08

February 2018

Added descriptions and corrected mistakes.

09

October 2018

Added functions accompanying the upgrade to unit version 1.2, and corrected 
mistakes.

Cat. No. W488-E1-09

Revision code

Summary of Contents for GX-AD0471











































































































































































































































































































































































































Reviews:

No comments