Omron GX-AD0471, User Manual, Page: 348 / 394

A Appendix
A - 44 GX-series EtherCAT Slave Unit User’s Manual
•
This object executes user adjustment. It writes upper adjustment value.
•
To adjust, enter a voltage (or current) equivalent to 100% from a connected device to the terminal of
input point you want to adjust. (Set the input range in advance.)
•
If you reset, it returns to the default setting.
•
The value is adjusted or reset only when the specific value is written to sub-indexes 1 to 4. This
prevents erroneous execution and resetting. The specific values are:
"save" for execution, "rset" for resetting.
Writing values other than the above is invalid.
•
A value 0000 0000 hex is indicated when reading.
•
Stores the lower limit of user adjustment.
3112 hex Analogue Input Adjustment High Execute
Sub-index 0: Number of channel
Range:
−
Unit:
−
Default: 04 hex Attribute:
−
Size: 1 byte (U8) Access: RO PDO map: Not possible
Sub-indexes 1 to 4: CH1-4 Adjustment High Execute
Range:
−
Unit:
−
Default: 00000000 hex Attribute: A
Size: 4 bytes (U32) Access: RW PDO map: Not possible
MSB LSB
e v a s
65 hex 76 hex 61 hex 73 hex
t e s r
74 hex 65 hex 73 hex 72 hex
3113 hex Analogue Input Adjustment Low Value
Sub-index 0: Number of channel
Range:
−
Unit:
−
Default: 04 hex Attribute:
−
Size: 1 byte (U8) Access: RO PDO map: Not possible
Sub-indexes 1 to 4: CH1-4 Adjustment Low Value
Range:
−
Unit:
−
Default: 0000 hex Attribute:
−
Size: 2 bytes (INT16) Access: RO PDO map: Not possible