Omron GX-AD0471, User Manual, Page: 195 / 394

8 - 17
8 Analog I/O Slave Unit
GX-series EtherCAT Slave Unit User’s Manual
8
-5 F
unc
tion
of
th
e
Analo
g
Ou
tpu
t Slave U
n
it
8
8-5-
3 User
Adjustme
nt
 Purpose
If final output voltage and current deviates due to characteristics of output devices and methods of
connection, correct the "deviation" and adjust outputs.
 Details of functions
This function corrects conversion values of output voltages and currents at 2 points, 0% and 100%,
as shown in the figure below.
The correctable range is from − 5% to +5% each of the minimum and maximum values of outputs.
The correctable range for each output range is as follows.
Set by SDO communications.
The target indexes are as follows.
•
Upper limit correction: 3212 hex Analogue Output Adjustment High Execute (user adjustment
execution (upper limit))
•
Lower limit correction: 3215 hex Analogue Output Adjustment Low Execute (user adjustment
execution (lower limit))
For the correction procedure, refer to the information in the corresponding index of "Appendix A-1
Object Dictionary" in page A-47.
8-5-3 User Adjustment
Overview of functions
Output range Low limit High limit
0 to 5 V
−
0.25 to +0.25 V 4.75 to 5.25 V
1 to 5 V 0.8 to 1.2 V 4.8 to 5.2 V
0 to 10 V
−
0.5 to +0.5 V 9.5 to 10.5 V
−
10 to +10 V
−
11 to
−
9.0 V 9.0 to 11 V
4 to 20 mA 3.2 to 4.8 mA 19.2 to 20.8 mA
Setting method
Converted data
Voltage/current
Before correction
After correction
0 %
100 %