![background image](http://html1.mh-extra.com/html/omron/fz4-series/fz4-series_user-manual_1633222552.webp)
7
M
eth
od
s
fo
rC
on
ne
ctin
g
an
d
C
om
m
un
ica
tin
g
w
ith
E
xte
rn
al
D
ev
ice
s
550
Controlling/Outputting through Parallel Communication
FZ4 User's Manual
Example) When 1 expressions are set in [Parallel Data Output]:
Reference
●
The output signal functions the same as when "Output Control" is set to "None".
When "Output Control" Is Set to "None" (p.547)
Input signal
Signal
Function
DI0 to 6
It turns off while continuously measuring (DI7 being turned on).
DI7
This is the execution trigger.
After DI0 to 6 is set, turn DI7 on after an interval over 1 ms.
Always have this turned ON during a continuous measurement. Stops continuous measurement
when this is turned OFF.
Reference
●
The ERROR signal turns on when the input command is not correctly performed.
●
Acquisition is difficult since the amount of time during which the BUSY signal is turned OFF during a continuous
measurement by the parallel command is extremely short at 1 ms or less. Acquires the OR signal at the time
when the GATE signal turns ON after adding the parallel judgement output at the end of the flow.
Acesst 1.0 6251194
Summary of Contents for FZ4 Series
