Omron FZ4 Series, User Manual, Page: 291 / 656

4
Using
Tool
FZ4 User's Manual Using Custom Command 289
Gets processing unit information
UnitInfo(<unitNo>, <kind>)
Parameters
<unitNo> Processing unit number (integer type)
<kind> The kind of information that is to be get (integer type)
Return Value
Processing unit information.
Description
Gets processing unit information.
The information kind is specified in the argument <kind>.
The value that can be specified is as follows.0: The kind of processing item
1: The size of setting data struct
2: The size of measure data struct
3: The size of control data struct
4: The maximum of figure data
5: The maximum of model data
6: The maximum of image data
7: The maximum of inner processing unit
8: Whether camera setting is effective or not
9: Whether processing unit measure processing can parallel or not
Example
Check processing units that are registered in the register to the processing unit number 2 model whether
If UnitInfo(2, 5) > 0 Then
'Possible to perform processing model
.
.
.
Endif
Gets the processing item ident name of processing unit
UnitItemIdent$(<unitNo>)
Parameters
<unitNo> Processing unit number (integer type)
Return Value
The processing item ident name of processing unit.
The null character string("") is returned for unregistration the specified processing unit.
Acesst 1.0 6251194