![background image](http://html1.mh-extra.com/html/omron/fz4-series/fz4-series_user-manual_1633222366.webp)
7
M
eth
od
s
fo
rC
on
ne
ctin
g
an
d
C
om
m
un
ica
tin
g
w
ith
E
xte
rn
al
D
ev
ice
s
364
Communicating through Serial Communication (PLC Link)
FZ4 User's Manual
Important
●
Before setting the communication specifications, set the "Serial (Ethernet)" communication module to "PLC link
(SYSMAC CS/CJ/CP/One)" (or to "PLC link (MELSEC Q series)" in the case of a PLC by Mitsubishi Electric
Corporation), save the setting, and then restart the system. When the system is restarted, the communication
settings are initialized.
Reference:
Setting the Start-up Status [Startup Setting] (p.347)
●
Use the same communication specification settings for the controller and the external device.
●
When making system settings/Ethernet settings, do not send external input into the Ethernet.
1.
On the Main screen, tap the [System] menu - [Communication] - [Ethernet(PLC Link)].
The Ethernet window is displayed.
2.
In the communication setting area, set the following items.
Setting item
Setting value
[Factory default]
Description
Address setting
●
Obtain an IP address
automatically
●
[Use the following IP address]
Set the IP address of the controller.
When "Obtain an IP address automatically"
is selected, the IP address of the controller
will be automatically obtained.
When "Use the following IP address" is
selected, set the IP address, subnet mask,
and the default gateway address.
IP address
a.b.c.d
a: 1 to 223
b: 0 to 255
c: 0 to 255
d: 0 to 255
[10.5.5.100]
Input the controller IP address.
Acesst 1.0 6251194
Summary of Contents for FZ4 Series
