Omron FZ4 Series, User Manual, Page: 155 / 656

4
Using
Tool
FZ4 User's Manual Using Custom Command 153
9
Function
name
Display and edit function name for selected comand.
10 Comment Display and edit comment for selected comand.
11
Enable/
Disable Set/display whether custom command is enabled.
If defined but not checked, it is not executed.
12 Busy On
Set/display whether to change to measurement stop state
(MeasureStop) before executing command. If checked, BUSY is
turned ON while command is executing, and then after execution of
command has finished, measurement stop state is released
(MeasureStart). Afterwards, a MeasureInit event is raised.
14 Export Export the macro program to file.
15 Import
Import the macro program from file.
The existing data will be overwritten.
2.
Select the command number to be registered.
3.
Enter the command name, function name and comment.
Setting item Description
Command
name
Specify Non-procedure command identification name.
Function
name
Set when using created command as function in other command.
Comment Maximum 256 characters
Busy On
Set whether to change to measurement stop state (MeasureStop) before executing
command. If checked, BUSY is turned ON while command is executing, and then
after execution of command has finished, a MeasureInit event is raised.
4.
Tap the [Edit] button.
Acesst 1.0 6251194