Omron FZ4 Series, User Manual, Page: 506 / 656

7
M
eth
od
s
fo
rC
on
ne
ctin
g
an
d
C
om
m
un
ica
tin
g
w
ith
E
xte
rn
al
D
ev
ice
s
504 Controlling/Outputting through Serial Communication (Non-procedure) FZ4 User's Manual
<Response format>
When processing is performed normally
When processing is not performed normally
<Parameters explanation>
Scene No. Specifies the scene No. to be read (0 to 31)
File name of
scene data
Specifies the name of the file to be read with a definite path (ex.: \USBDisk\abc.scn, E:\abc.scn).
Only files that are under the following systems and have an "SCN" extension can be read.
Load to FZ4-1100 series FZ-L35 /600/700 series
RAMDisk C:\Data\RAMDisk \RAMDISK
USBDisk E:\,F:\,G:\,H:\ \USBDisk to \USBDisk3
Important
●
Do not turn off power to the controller until there is a response.
(Example)
When "LABEL.SCN" in the "IMG01" folder of the USB memory to which the drive name "USBDisk2" is
assigned is loaded to the controller as scene 2.
<Command>
<Response>
SCNSAVE
Saves scene data.
<Command format>
<Response format>
When processing is performed normally
Acesst 1.0 6251194