![background image](http://html1.mh-extra.com/html/omron/fz4-series/fz4-series_user-manual_1633222213.webp)
4
Using
Tool
FZ4 User's Manual
Using Custom Command
211
Example
Performs a batch input of the state of terminals such as the parallel I/Os
AA& = GetAll("ParallelIo")
Get global data
GetGlobalData <dataIdent>, <data>
Parameters
<dataIdent>
Data ident that is to be get
<data>
Data that is to be get
Return Value
None.
Description
Variable that stores acquired data is specified by the argument <data>(element of array variable is
available)
The acquired data is stored in the variable specified after it converts into the type of the specified
variable.
Example
Gets the value of global data "GsetData".
GetGlobalData "GsetData", gdata&
Gets processing unit image size
GetImageSize <unitNo>, <measureImageNo>, <sizeX>, <sizeY>
Parameters
<unitNo>
Processing unit number (integer type)
<measureImageNo>
Image number of image at the time of register for processing (integer type)
<sizeX>
Obtained X size of the measured image (integer type)
<sizeY>
Obtained Y size of the measured image (integer type)
Return Value
None.
Acesst 1.0 6251194
Summary of Contents for FZ4 Series
