Omron FZ4 Series, User Manual, Page: 359 / 656

6
Changing
the
System
Environment
FZ4 User's Manual Setting the System Operation Environment 357
folder, user name and password.
Setting item
Set value
[Factory
default]
Description
Share name S,T,U,V,W,X,Y,Z
This is the name to be recognized by the controller as a network drive.
Only 1 unit can be connected.For FZ4-L35
/FZ4-6 /FZ4-7
, the shared name is displayed in the \Network folder.
For FZ4-11 /FZ4-H11 , the drive letters, such as E:, F:, G:,
and H:, are displayed.
Shared
folder
-
Specify the shared folder name.
Specify the name of the folder that has been created in advance on
the network drive. For example, if the host name is VISION and the
shared name is COMMON, specify a name such as
\\VISION\COMMON.
User name - Enter the user name and the password to access the network drive.
If you are unclear about the user name or the password, contact the
device network administrator.
Password -
4.
Tap [OK].
5.
Tap [OK] on the network drive setting screen, and close the screen.
The setting is enabled after the controller is restarted.
Acesst 1.0 6251194