Omron FZ4 Series, User Manual, Page: 523 / 656

7
M
eth
od
s
fo
rC
on
ne
ctin
g
an
d
C
om
m
un
ica
tin
g
w
ith
E
xte
rn
al
D
ev
ice
s
FZ4 User's Manual Controlling/Outputting through Serial Communication (Non-procedure) 521
Output format
The measurement data is multiplied by 1000 and output is continuous with 4 bytes per each data item.
Negative numbers are output in 2's complement format.
For a definition of 2's complement, see Reference: Terminology Explanations (p.590) .
Example) When Data 0 is "256.324", and data 1 is "-1.000"
Note
●
Unlike ASCII output, binary output has no separators between data such as field separators or record
separators, etc.
Reference:
"Processing Item List Manual", "Data Output" (p.574)
The range of values that can be output is as follows:
-2147483.648 <= Measurement value <= 2147483.647
When measurement value is < -2147483.648, "-2147483.648" is output.
When measurement value is > 2147483.647, "2147483.647" is output.
When JG (Judgement) is set, the next value is output.
OK:1000(1
×
1000)
NG:1000(-1
×
1000)
Note
●
Even if measurement is complete, data output will not stop until all of the data is output. Please note, data
output will not be interrupted.
Acesst 1.0 6251194