Omron FZ4 Series, User Manual, Page: 450 / 656

7
M
eth
od
s
fo
rC
on
ne
ctin
g
an
d
C
om
m
un
ica
tin
g
w
ith
E
xte
rn
al
D
ev
ice
s
448 Controlling/Outputting through Serial Communication (Non-procedure) FZ4 User's Manual
When processing is not performed normally
<Parameters explanation>
File name of
scene group
data
Specifies the save destination and file name during saving with a definite path (ex.:
\USBDisk\abc.bkd, E:\abc.bkd).
Save destinations include directories under the following systems.Be sure to attach a "BKD"
extension to the file name.
Save destination FZ4-1100 series FZ-L35 /600/700 series
RAMDisk C:\Data\RAMDisk \RAMDISK
USBDisk E:\,F:\,G:\,H:\ \USBDisk to \USBDisk3
Important
●
Do not turn off power to the controller until there is a response.
(Example)
When the currently used scene group 0 data is saved as "LABEL1.BKD" in the "IMG01" folder
in the USB memory to which the drive name "USBDisk2" is assigned
<Command>
<Response>
BRUNCHSTART or BSU
Branches to the flow head (processing unit No. 0). This command can only be executed when the
corresponding flow control processing item is used.
<Command format>
or
(Response format)
When processing is performed normally
When processing is not performed normally
Acesst 1.0 6251194