![background image](http://html1.mh-extra.com/html/omron/fz4-series/fz4-series_user-manual_1633222312.webp)
4
Using
Tool
310
Using Custom Command
FZ4 User's Manual
Overview
This is a module is for sending and receiving commands and data by Ethernet TCP protocol.
System data
Identification
Meaning
Initial value
enableDhcp
Enable DHCP
0:Disabled
1:Enabled
0
ipAddress
IP address of the system
10.5.5.100
subnetMask
Subnet mask
255.255.255.0
defaultGateway
Gateway address
10.5.5.110
dns
DNS server address
10.5.5.1
portNo
Port number to receive commands
9600
Supported functions
IoInitialize
○
GetPort
○
Input terminal a point input (p.214)
PutPort
○
Output terminal a point output (p.250)
BusyOut
×
-
JudgeOut
×
-
RunOut
×
-
GetAll
○
Input terminal all point input (p.210)
PutAll
○
Output terminal all point output (p.249)
ReceiveData
○
SendData
○
SendString
○
ReadPlcMemory
×
-
WritePlcMemory
×
-
SetPlcData
×
-
GetPlcData
×
-
Example
Receive data
Set an IP address and parameter size (*4 integer type domain) in a parameter to use an Ethernet.
Dim data&(256)
Dim ipaddr&(4)
'Set the IP address of the destination.
ipaddr&(0) = 10
ipaddr&(1) = 1
ipaddr&(2) = 1
ipaddr&(3) = 101
'Gets the five data.
ReceiveData "TcpNormal", data&(), 4*5, size&, ipaddr&(), 4*4
Send data
Set an IP address and parameter size (*4 integer type domain) in a parameter to use an Ethernet.
Acesst 1.0 6251194
Summary of Contents for FZ4 Series
