4
Using
Tool
250
Using Custom Command
FZ4 User's Manual
Return Value
None.
Description
Identification name (string) of I/O module that executes send processing is specified in
argument<ioIdent>.
The content of operation depends on the specification of the I/O module.
Reference:
Example
Performs a batch output of the state of terminals such as the parallel I/Os
data& = 1
PutAll "ParallelIo", data&
Output terminal a point output
PutPort <ioIdent>, <portNo>, <state>
Parameters
<ioIdent>
Identification name (string) of I/O module that executes send processing
<portNo>
Port number (integer)
<state>
State (integer) 0:OFF,1:ON
Return Value
None.
Description
Identification name (string) of I/O module that executes send processing is specified in
argument<ioIdent>.
The content of operation depends on the specification of the I/O module.
Reference:
Example
Using a parallel interface, turn ON the DO0.
data& = 1
PutPort "ParallelIo", 0, data&
Acesst 1.0 6251194
Summary of Contents for FZ4 Series
