Omron FZ4 Series, User Manual, Page: 533 / 656

7
M
eth
od
s
fo
rC
on
ne
ctin
g
an
d
C
om
m
un
ica
tin
g
w
ith
E
xte
rn
al
D
ev
ice
s
FZ4 User's Manual Control/Output through EtherNet/IP 531
･
Command Area
Signal name Variable name
EXE EIPOutput.ControlFlag.F[0]
DSA EIPOutput.ControlFlag.F[16]
Command code EIPOutput.CommandCode
Command parameter 1 EIPOutput.CommandParam1
Command parameter 2 EIPOutput.CommandParam2
Command parameter 3 EIPOutput.CommandParam3
･
Response Area
Signal name Variable name
FLG EIPInput.StatusFlag.F[0]
BUSY EIPInput.StatusFlag.F[1]
OR EIPInput.StatusFlag.F[3]
RUN EIPInput.StatusFlag.F[4]
GATE EIPInput.StatusFlag.F[16]
Command code EIPInput.CommandCodeEcho
Response code EIPInput.ResposeCode
Response data EIPInput.ResposeData
･
Output Area
Signal name Variable name
Output data 1 EIPInput.OutputData[0]
・
・
・
Output data 8 EIPInput.OutputData[7]
Accessing Communications Areas by Specifying I/O Memory Addresses
AT specifications can be set for variables to individually specify the I/O memory addresses that are
assigned in the communications areas.
1.
Setting Tag Sets (Network Configurator)
Specify the tag names in the PLC directly by using the I/O memory addresses that are assigned
in the communications areas. (Output tags are specified for the input connections to the Sensor
and input tags are specified for output connections to the PLC.)
Setting Examples
Output tag: D0
Input tag: D100
2.
Setting Variables (Sysmac Studio)
Define variables with AT specifications to the I/O memory addresses that are assigned in the
Acesst 1.0 6251194