Omron FZ4 Series, User Manual, Page: 304 / 656

4
Using
Tool
302 Using Custom Command FZ4 User's Manual
Supported functions
IoInitialize
○ －
GetPort
○
Reference: Output terminal a point output (p.214)
PutPort
○
Reference: Input terminal a point input (p.250)
BusyOut
○
Reference: Output BUSY state (p.188)
JudgeOut
○
Reference: Judge result output (p.230)
RunOut
○
Reference: ROutput RUN state (p.230)
GetAll
○
Reference: Input terminal all point input (p.210)
PutAll
○
Reference: Output terminal all point output (p.249)
ReceiveData
○
Reference: Receive data (p.252)
SendData
○
Reference: Send data (p.267)
SendString
○
Reference: Sends string (p.268)
ReadPlcMemory
× －
WritePlcMemory
× －
SetPlcData
× －
GetPlcData
× －
Example
Receive data
A parameter of ReceiveData, the parameter size are unnecessary.
Dim data&(256)
'Gets the five data.
ReceiveData "ParallelIo", data&(), 4*5, size&
Send data
A parameter of SendData, the parameter size are unnecessary.
Dim data&(256)
'Transmit the five data.
SendData "ParallelIo", data&(), 4*5
SerialNormal
Serial Interface Non-procedure communication
IoModule identification name
SerialNormal
SerialNormal2 (Fxxx series method)
Overview
This is a module is for sending and receiving commands and data via the serial interface.
Acesst 1.0 6251194