Omron FZ4 Series, User Manual, Page: 317 / 656

4
Using
Tool
FZ4 User's Manual Using Custom Command 315
UdpPlcLinkY
PLC Link (JEPMC MP) communication
IoModule identification name
UdpPlcLinkY
Overview
This is a module is for sending and receiving commands and data by Ethernet PLC Link protocol.
System data
Identification Meaning Initial value
enableDhcp
Enable DHCP
0:Disabled
1:Enabled
0
ipAddress IP address of the system 10.5.5.100
subnetMask Subnet mask 255.255.255.0
defaultGateway Gateway address 10.5.5.110
dns DNS server address 10.5.5.1
destIpAddress Output IP address 0.0.0.0
portNo Input port No 9600
PLC Link data
commandArea Command area Area Data register
commandMemoryAddress Command area Address 0
responseArea Response area Area Data register
responseMemoryAddress Response area Address 100
outputArea Data Output area Area Data register
outputMemoryAddress Data Output area Address 200
handshake handshaking 1
responseTimeout Retry interval [ms] 10000
Area classification
Area classification name Classification code
Data register 176
Supported functions
IoInitialize
○ －
GetPort
○
Reference: Input terminal a point input (p.214)
PutPort
○
Reference: Output terminal a point output (p.250)
BusyOut
× －
JudgeOut
× －
RunOut
× －
GetAll
○
Reference: Input terminal all point input (p.210)
Acesst 1.0 6251194