Omron FZ4 Series, User Manual, Page: 217 / 656

4
Using
Tool
FZ4 User's Manual Using Custom Command 215
Return Value
Returns the value of the integer.
The content of the value is the bit data that is fetched.
0:Bit OFF
1:Bit ON
Description
Identification name(string) of I/O module that executes received processing is specified in
argument<ioIdent>.
The content of operation depends on the specification of the I/O module.
Reference:
List of IO modules (p.299)
Example
If DI3 is ON, carry out processing.
pno3& = GetPort("ParallelIo", 3)
If pno3& = 1 Then
'Carry out processing
Endif
Gets system data
GetSystemData <dataIdent0>, <dataIdent1>, <data>
Parameters
<dataIdent0> Data ident 0 to be get
<dataIdent1> Data ident 1 to be get
<data> Data to be get
Return Value
None.
Description
Gets system data.
Reference:
List of system data (p.297)
Example
Gets the information of the save capture directory. Perform copying of Sample.bmp file to
"C:\temp\bmp".
GetSystemData "Measure", "captureDirectory", dirName$
file$ = d"\Sample.bmp"
Fcopy file$ , "C:\temp\bmp\Sample.bmp"
Acesst 1.0 6251194