Omron CP1L-L14D Series, Operation Manual

Page: 132 / 671

99
Wiring CP1L CPU Units Section 3-4
Secure the DIN Track to the control panel using M4 screws separated by
210 mm (6 holes). The tightening torque is 1.2 N·m.
3-4 Wiring CP1L CPU Units
Note (1) Do not remove the protective label from the top of the Unit until wiring has
been completed. This label prevents wire strands and other foreign mat-
ter from entering the Unit during wiring procedures.
(2) Remove the label after the completion of wiring to ensure proper heat dis-
sipation.
15
10
4.5
25 25 25
10
25 15
1000
1000 (500)
(See note.)
PFP-100N2
PFP-100N/50N
15
10
4.5
25 25 25
10
25 15 (5)
(See note.)
1
16
1.5 1
29.2 24 27 30
±
0.3
7.3
±
0.15
35
±
0.3 27
±
0.15
28.25
×
4.5 oblong holes
Note: PFP-50N dimensions are given in parentheses.