Omron CP1L-L14D Series, Operation Manual

Page: 72 / 671

39
Specifications Section 2-2
DIP Switch for Operation Settings
Note (1) Set both pins 2 and 3 to either ON (2-wire) or OFF (4-wire).
(2) To disable the echo-back function, set pin 5 to ON (RS control enabled).
(3) When connecting to a device on the N side in a 1: N connection with the
4-wire method, set pin 6 to ON (RS control enabled).
Also, when connecting by the 2-wire method, set pin 6 to ON (RS control
enabled).
2-2 Specifications
2-2-1 CP1L CPU Units
General Specifications
Pin Settings
1 ON ON (both ends) Terminating resistance selection
OFF OFF
2 ON 2-wire 2-wire or 4-wire selection (See
note 1.)
OFF 4-wire
3 ON 2-wire 2-wire or 4-wire selection (See
note 1.)
OFF 4-wire
4 --- --- Not used.
5 ON RS control enabled RS control selection for RD (See
note 2.)
OFF RS control disabled (Data
always received.)
6 ON RS control enabled RS control selection for SD (See
note 3.)
OFF RS control disabled (Data
always sent.)
O N
1 2 3 4 5 6
Power supply classification AC power supply DC power supply
Model
numbers
40 I/O points CP1L-M40DR-A CP1L-M40DR-D, CP1L-M40DT-D, or
CP1L-M40DT1-D
30 I/O points CP1L-M30DR-A CP1L-M30DR-D, CP1L-M30DT-D, or
CP1L-M30DT1-D
20 I/O points CP1L-L20DR-A CP1L-L20DR-D, CP1L-L20DT-D, or
CP1L-L20DT1-D
14 I/O points CP1L-L14DR-A CP1L-L14DR-D, CP1L-L14DT-D, or
CP1L-L14DT1-D
Power supply 100 to 240 VAC
50/60 Hz 24 VDC
Operating voltage range 85 to 264 VAC 20.4 to 26.4 VDC
Power consumption 50 VA max. (CP1L-M
@
DR-A)
30 VA max. (CP1L-L
@
DR-A)
See note 3.
20 W max. (CP1L-M
@
DT
@
-D)
13 W max. (CP1L-L
@
DT
@
-D)
Inrush current
(See note 1.) 100 to 120 VAC inputs:
20 A max.(for cold start at room tem-
perature.)
8 ms max.
200 to 240 VAC inputs:
40 A max.(for cold start at room tem-
perature.)
8 ms max.
30 A max.(for cold start.)
20 ms max.