Omron CP1L-L14D Series, Operation Manual

Page: 92 / 671

59
Specifications Section 2-2
(2) Due to distortions in pulse waveforms resulting from connecting cable im-
pedance, the pulse widths in actual operation may be smaller than the
values shown above.
PWM Outputs (CIO 100.01 and CIO 100.03)
2-2-4 CP/CPM1A-series Expansion I/O Unit I/O Specifications
Input Specifications (CP1W-40EDR/40EDT/40EDT1/20EDR1/20EDT/20EDT1/8ED)
Note (1) The response time is the hardware delay value. The delay set in the PLC
Setup (0 to 32 ms, default: 8 ms) must be added to this value. For the
CP1W-40EDR/EDT/EDT1 and CPM1A-40EDR/EDT/EDT1, a fixed value
of 16 ms must be added.
(2) Do not apply voltage in excess of the rated voltage to the input terminal.
Output Specifications
Relay Outputs (CP1W-40EDR/20EDR1/16ER/8ER)
Item Specification
Max. switching capacity 30 mA/4.75 to 26.4 VDC
Max. output frequency 1 kHz
PWM output accuracy For ON duty +1%,
−
0%:10 kHz output
For ON duty +5%,
−
0%: 0 to 32.8 kHz output
Output waveform
Item Specification
Input voltage
24 VDC
+10%
/
−
15%
Input impedance 4.7 k
Ω
Input current 5 mA typical
ON voltage 14.4 VDC min.
OFF voltage 5.0 VDC max.
ON delay 1 ms max. (See note 1.)
OFF delay 1 ms max. (See note 1.)
Circuit configuration
ON
t
ON
T
OFF
×
100%
t
ON
T
ON duty =
IN
IN
COM
4.7 k
Ω
750
Ω
Input LED
Internal
circuits
Item Specification
Max. switching capacity 2 A, 250 VAC (cos
φ
= 1),
2 A, 24 VDC (4 A/common)
Min. switching capacity 5 VDC, 10 mA