Nortel VoIP Gateway, Configuration Manual

Page: 61 / 220

Configuring the Automatic Dialing phone numbers 61
Norstar VoIP Gateway Configuration Guide
Configuring the Automatic Dialing phone numbers
The Automatic Dialing Table defines the telephone numbers that are automatically dialed when
this port is used. This table is used only if Automatic Dialing feature is enabled.
To configure the Automatic Dialing Table:
1 Access the web interface.
2
Click the Protocol Management button.
3 Click the Automatic Dialing tab.
The Automatic Dialing Table screen appears.
Figure 11 Automatic Dialing Table
4 In the Destination Phone Number box for a port, enter the telephone number to dial.
When this VoIP Gateway port is selected when making a call, the number in the Destination
Phone Number box is automatically dialed.
If you do not want to use this port for Automatic Dialing, leave the Destination Phone
Number box blank.
5
Repeat step 4 for each port you want to use for Automatic Dialing.
6 Click the Submit button to save your changes.
7
To save the changes so they are available after a power fail, you must save the changes to
non-volatile memory. To save the changes to non-volatile memory:
a
Click the Save Configuration button.
The Save Configuration to the system screen appears.