Nortel VoIP Gateway, Configuration Manual, Page: 138 / 220

138 Restoring the VoIP Gateway configuration
P0606298 02
5
Navigate to the folder where you want to save the INI.
6 Click the Save button.
The VoIP Gateway starts loading INI file into the folder you selected.
A message appears when the file transfer is completed.
Restoring the VoIP Gateway configuration
If your VoIP Gateway has been replaced or has lost its programming information, you can restore
the VoIP Gateway configuration from a previous back up.
You must have a back up of the VoIP
Gateway information stored on your computer to perform a restore.
To restore the VoIP Gateway configuration:
1 Access the web interface.
2
Click the Advanced Configuration button.
3 Click the Configuration File tab.
The Configuration File screen appears
4 Click the Browse button.
5
Navigate to the folder that contains the INI file you want to load.
6 Click the file and click the Open button.
The filename and path of the file appears in the box beside the Browse button.
7 Click the Send File button.
8 To apply the changes, you must reset the VoIP Gateway. To reset the VoIP Gateway:
a Click the Reset button.
b
Click the Restart button.
A confirmation dialog box appears.
c
Click the OK button.