Nortel VoIP Gateway, Configuration Manual

Page: 87 / 220

Contents of the INI file 87
Norstar VoIP Gateway Configuration Guide
Contents of the INI file
The INI file contains the following information:
• “Basic, Logging and Web parameters”
• “Channel parameters”
• “H.323 Parameters”
All INI file data is downloaded at startup and stored in non-volatile memory. The provisioning
procedure should be used again only to modify VoIP Gateway parameters.
If a parameter is not specified in the INI file, values associated with that parameter are reset to a
default value. These values may not be the same as the values that were configured for the VoIP
Gateway at the time of manufacture. All parameters that are defined in the INI file contained in the
CD ROM or obtained by uploading the INI file from the VoIP Gateway should also be defined in
the user modified INI file in order for the VoIP Gateway to function correctly. You may alter these
parameters, but the parameter should be specifically defined. The easiest way to ensure this is to
upload the INI file from the VoIP Gateway to the computer, edit this file and then download the
resulting file.
The Default Channel parameters are applied to all VoIP Gateway channels.
The Channel Parameters define the DTMF, Fax and Modem transfer modes. Refer to “DTMF, Fax
and Modem transport modes” on page 203 .