Nortel VoIP Gateway, Configuration Manual

Page: 103 / 220

Contents of the INI file 103
Norstar VoIP Gateway Configuration Guide
NumberMapTel2IP a,b,c,d,e,f
a = Dialed number (up to 19 characters)
b = Number of stripped digits
c = New prefix to be added, or "none"
d = Number of remained digits from right
e = H.225/Q.931 Number Plan
f = H.225/Q.931 Number Type
This parameter defines the rule(s) for changing the destination phone number
received in an incoming Telephone to IP call. Each rule is applied to a number
that matches the "a" number.
The "a" (dialed number) can be one of the following notations or any combination
of them:
- Single number
- Range, such as [10-20]
- Group of numbers such as [10,20,30]
- Wild characters, such as - xxx (x - for any digit)
- "#" - terminating character to specify exact number
- "*" - to specify that the number is prefix
Examples:
12345#
54324*
123[100-200]*
123[100-200]xxxx#
[10,20,34]xxx#
xxx305*
The "b" and "c" actions apply to a number that starts with the "a" prefix. The
actions apply to the number in the following order: "b", "d" and then "c".
Parameters can be skipped by entering "$$", such as
NumberMapTel2IP=01,2,972,$$,0,0
Plan,Type values:
0,0 - Unknown, Unknown
9,0 - Private Unknown
9,1 - Private Level 2 Regional
9,2 - Private Level 1 Regional
9,3 - Private PISN Specific
9,4 - Private Level 0 Regional (local)
1,1 - Public International
1,2 - Public National
1,3 - Public Network Specific
1,4 - Public Subscriber
1,6 - Public Abbreviated
Table 16 H.323 Parameters (Continued)
INI File Field Name Valid Range and Description