manualshive.com logo in svg

Nortel VoIP Gateway, Configuration Manual, Page: 183 / 220

Share
Download
Nortel VoIP Gateway Configuration Manual Download Page 183

Radvision Gatekeeper    183

Norstar VoIP Gateway Configuration Guide

•

Optionally, the Tel to IP Routing table may be filled in for all network destinations and 
Protocol Management / Protocol Definition / Fallback to Internal Routing set to “yes”. With 
this setup, if the Radvision ECS gatekeeper should fail or be unavailable, the VoIP Gateway 
will revert to its internal routing tables for call setup.

Note: 

This method of registration has been designed specifically to interoperate with the 

Radvision ECS gatekeeper and uses a part of the H.323 protocol that may not work with 
other gatekeepers. Interoperability with other gatekeepers has not been tested. When 
working with another brand of gatekeeper, you should use only the following Protocol 
Management / Protocol Definition /Gateway Registration Types:

•

E.164

•

H.323-ID

•

E.164&H.323-ID

Summary of Contents for VoIP Gateway





























































































































































































































Reviews:

No comments