Nortel VoIP Gateway, Configuration Manual

Page: 52 / 220

52 Configuring the Number Manipulation tables
P0606298 02
a
Click the Save Configuration button.
The Save Configuration to the system screen appears.
b
Click the Save Configuration button that is in middle of the screen.
A confirmation message appears when the save is complete.
Configuring number manipulation for Source Phone Numbers for IP
to Norstar calls
This number manipulation table defines the rules for changing the source number received in IP to
Norstar calls. A common use of this table is to alter the Calling Line Identification information that
is presented on the destination Norstar telephone.
To configure the number manipulation for Source Phone Numbers for IP to Norstar calls:
1
Access the web interface.
2 Click the Protocol Management button.
3
Point to the Manipulation Tables tab and click the IP -> Tel Source Numbers link.
The
Source Phone Number Manipulation Table for IP->TEL calls
screen appears.
Note: The Save Configuration option is useful for trying out a new configuration.
Simply make the change and try out the new configuration. If you are happy with the
new configuration, save the changes to non-volatile memory. If you are not happy
with the new configuration, do not save the changes to non-volatile memory and
remove power from the VoIP Gateway. The VoIP Gateway will return to the previous
configuration.