Nortel VoIP Gateway, Configuration Manual

Page: 56 / 220

56 Configuring the Number Manipulation tables
P0606298 02
Figure 9
Source Phone Number Manipulation Table for TEL->IP calls
screen
4
To configure the first ten entries, click the Table Index drop list and click 1-10.
To configure the last ten entries, click the Table Index drop list and click 11-20.
5
Configure the Phone Number Manipulation Table according to the following table.
Table 9
Source Phone Number Manipulation Table for TEL->IP calls (
Norstar
to IP)
Parameter Description
Prefix Enter the number you want to match for this table entry.
When entering a number, you can create an entry that represents multiple numbers using
the following notation:
• [n-m] represents a range of numbers
• [n,m] represents multiple numbers
• x represents any single digit
• * represents any digit or multiple digits
• # represents the end of a number
• For example:
[5551200-5551300] represents all of the numbers from 5551200 to 5551300
[2221,2231,2241] represents the numbers 2221, 2231 and 2241
54324* represents any number that starts with 54324
54324xx represents a 7 digit number that starts with 54324
123[100-200]* represents numbers that starts with 123100 to numbers that start with
123200.
When the dialed number matches the number you enter here, the rules in this number
manipulation table entry are applied.
The VoIP Gateway matches the rules starting at the top of the table. For this reason, enter
more specific rules above more generic rules. For example, if you enter 551* in entry 1
and 55* in entry 2, the VoIP Gateway applies rule 1 to numbers that starts with 551 and
applies rule 2 to numbers that start with 550, 552, 553, 554, 555, 556, 557, 558 and 559.
However if you enter 55* in entry 1 and 551* in entry 2, the VoIP Gateway applies rule 1 to
all numbers that start with 55 including numbers that start with 551.