Nortel BayStack 660, Use Manual

Page: 121 / 163

Command Line Interface
203939-B
6-3
CLI Command List
Table 6-1 lists and describes the commands in the CLI. For most commands, the
table lists a page number where you can find more information.
Table 6-1. CLI Command List
Commands and Descriptions Page Number
ACL commands— Use these commands to add/delete Access Control
List (ACL) entries and to display the list.
acl add <mac_addr>
acl control {on | off}
acl delete <mac_addr>
acl show
Go to page 6-6
Adapter commands— Use these commands to upgrade the adapter’s
firmware and to display the adapter’s attributes.
adpt load-image <file_name> <ip_addr>
adpt show
Go to page 6-8
AUL commands— Use these commands to configure the Associated
Users List (AUL) and to display the list.
aul limit <num_mus>
aul show
Go to page 6-9
Authentication commands— Use these commands to configure/display
authentication scheme attributes.
auth open-system {on | off}
auth shared-key {on | off}
auth show
Go to page 6-10
Configuration commands— Use these commands to restore factory
default configuration and to save current configuration to flash.
config reset
config save
Go to page 6-11
Encapsulation commands— Use these commands to configure/display
encapsulation attributes.
encap scheme {straight | 802.1h+NTISTT}
encap show
Go to page 6-11
book.fm Page 3 Wednesday, September 22, 1999 1:41 PM