Nortel BayStack 660, Use Manual

Page: 89 / 163

Installing and Starting the AP Manager
203939-B
4-33
Enabling Telnet
To enable or disable Telnet access:
1.
Choose Configure > Group.
2.
Select the group you want to configure.
The Multiple Configuration Wizard dialog box ( Figure 4-15 ) opens.
3.
Click Enable Telnet Access.
4.
Click Next.
The Enable Telnet check box opens.
5.
Check the Enable Telnet Access check box to select (default) or deselect
Telnet access.
6.
Click Next.
A confirmation dialog box opens.
7.
Click Finish if the information is correct.
The Configuration Completion dialog box opens ( Figure 4-16 ) showing that
the changes are being processed.
8.
Click OK when the process is complete.
Setting the Dwell Time (FH)
The dwell time is the length of time a radio uses before it “hops” to another
frequency. Choose a time between 1 and 390 (TUs).
To set the Dwell Time (FH) for the access point:
1.
Choose Configure > Group.
2.
Select the group you want to configure.
The Multiple Configuration Wizard dialog box ( Figure 4-15 ) opens.
3.
Click Dwell Time (FH).
4.
Click Next.
The Dwell Time (FH) dialog box opens.
5.
Enter a value between 1 and 390.
book.fm Page 33 Wednesday, September 22, 1999 1:41 PM