Nortel BayStack 660, Use Manual

Page: 91 / 163

Installing and Starting the AP Manager
203939-B
4-35
Setting the Channel (DS)
This sets the Channel (DS) for the access point. “DS” refers to Direct Sequence.
To enable the Channel (DS):
1.
Choose Configure > Group.
2.
Select the group you want to configure.
The Multiple Configuration Wizard dialog box ( Figure 4-15 ) opens.
3.
Click Channel (DS).
4.
Click Next.
The Channel (DS) dialog box opens.
5.
Enter a value between 1 and 11.
6.
Click Next.
A confirmation dialog box opens.
7.
Click Finish if the information is correct.
The Configuration Completion dialog box opens ( Figure 4-16 ) showing that
the changes are being processed.
8.
Click OK when the process is complete.
Setting the Translation Mode
To set the Translation Mode for the access point:
1.
Choose Configure > Group.
2.
Select the group you want to configure.
3.
Click Translation Mode.
4.
Click Next.
The Translation Mode dialog box opens asking you to select either:
• 802.1h+NTISTT (default)
• Straight encapsulation
5.
Select the translation mode.
book.fm Page 35 Wednesday, September 22, 1999 1:41 PM