Nortel BayStack 660, Use Manual

Page: 116 / 163

Using the BayStack 660 Wireless LAN Access Point
5-16
203939-B
Removing a BOOTP Entry
To remove a BOOTP Entry:
1.
Choose Tools > BOOTP Table.
The BOOTP dialog box ( Figure 5-9 ) opens.
2.
Click the entry that you want to remove.
3.
Click Remove.
The entry is removed from the BOOTP dialog box.
Setting BOOTP Restrictions
The BOOTP restrictions prevent the AP Manager from creating duplicate IP
addresses. You can also use this parameter to limit AP Manager to a particular set
of addresses or to exclude a set of addresses that are already in use.
To restrict a BOOTP entry:
1.
Choose Tools > BOOTP Table.
The BOOTP dialog box ( Figure 5-9 ) opens.
2.
Click Restrictions.
The BOOTP Restrictions dialog box ( Figure 5-12 ) opens.
book.fm Page 16 Wednesday, September 22, 1999 1:41 PM