Nortel BayStack 660, Use Manual

Page: 63 / 163

Installing and Starting the AP Manager
203939-B
4-7
To configure the access point:
1.
Choose Configure > Access Point.
The Access Points dialog box opens ( Figure 4-4 ). A list of access points
installed on the Ethernet segment will begin to list in the entry field.
Figure 4-4. Access Points Dialog Box
Note: In normal operation, your access points is detected and then displayed in
the Access Point dialog box ( Figure 4-4 ).
book.fm Page 7 Wednesday, September 22, 1999 1:41 PM