Nortel BayStack 660, Use Manual

Page: 54 / 163

Using the BayStack 660 Wireless LAN Access Point
3-4
203939-B
9.
Connect the network and power cables to the access point.
10.
Follow the cable connection instructions for a 10BASE2 Ethernet
connection or a 10BASE-T Ethernet connection.
For a 10BASE-T Ethernet connection, refer to Figure 3-2 and the steps that
follow the illustration.
For a 10BASE2 connection, contact Nortel Network technical support.
Figure 3-2. 10BASE-T Ethernet Connection
a.
Plug the male RJ-45 connector on the modular data cable into the
female RJ-45 connector on the back of the access point.
b.
Plug the other end of the data cable into a network access port or
directly into a network hub or Ethernet switch port.
11.
Plug the AC power adapter into the small round socket on the back of the
access point (
Figure 3-3 ).
8709FB
book.fm Page 4 Wednesday, September 22, 1999 1:41 PM