Nortel BayStack 660, Use Manual

Page: 82 / 163

Using the BayStack 660 Wireless LAN Access Point
4-26
203939-B
Table 4-8 describes the symbols in the Group dialog box.
6.
Click the access points that you want to add to the new group.
A group should contain more than one access point.
7.
Click Finish.
The Groups dialog box opens again ( Figure 4-11 ); however this time, it
displays the group has been added.
Viewing a Group
To view a group:
1.
Choose Edit > Groups.
The Groups dialog box opens ( Figure 4-11 ).
2.
Click the group you want to view.
3.
Click View.
The Groups dialog box opens, showing the AP Name, the IP address and the
MAC address of the access point.
4.
Click Done.
Table 4-8. Groups Dialog Box Status Symbols
Symbol Description
- Access point is not recognized by the AP Manager application.
* Access point has been verified by the AP Manager application.
! AP Manager attempted to verify the access point, but the attempt failed.
Q The group is included in the Quick List.
book.fm Page 26 Wednesday, September 22, 1999 1:41 PM