®
Instruction manual
NivuSonic Clamp on
Fig. 8-48
Remote access
Ethernet
By selecting this point it is possible to define if the IP address (required for unit
access) is to be assigned automatically or manually.
If >YES< the assignment will be executed by DHCP routine (similar to Internet
PC setting „Get IP address automatically“).
If >NO< enter the unit IP address manually. For this purpose use a free network
address.
Æ
Observe current network configuration!!!
Fig. 8-49
IP address assignment
If manual IP address assignment has been selected enter IP address, gateway
(optional, in case of interdigitated subnets) as well as IP mask.
The default setting (255.255.255.000) is normally suitable for most connections.
Fig. 8-50
Manual setting of IP address
If in doubt please consult your responsible system administrator or use the
NIVUS initial start-up service
Page 72
Summary of Contents for NivuSonic Clamp On
Page 109: ...18 Declaration of Conformity...
Page 110: ......
