Instruction manual
NivuSonic Clamp on
®
E-Mail
This option allows to send received data to up to 4 recipients.
To achieve this select "active".
Fig. 8-55
E-Mail parameter settings
E-mail:
-
Mail Server: Enter the server address of your email account here )e.g.
smtp.gmx.net)
-
From: Enter a valid email address of the smtp-server mentioned above here.
This ist he unit’s sender address.
-
Username: Enter the user name of the aforementioned email account
-
Password: : Enter the password of the aforementioned email account
-
To: Here it is possible to determine up to 4 email addresses the mail is to be
sent to at the same time.
-
Data format: Select between text file and binary file. Binary files are for inte-
gration of the unit into the "NICOS" process conducting system by NIVUS.
-
Cycle: This defines the cycle to send the data mails (e.g. every 24 hours)
-
Delay: The delay entered here refers to the transmission cycle set. The mail
will be sent using the determined delay (example: cycle 24 h. Delay 07:00
causes the mail to be sent each day at 07:00 AM.
DNS Server
This point will be indicated only if remote access has been enabled and
>Ethernet: IP_Ad aut = ON< has been set.
Normally it is useful to set >DNS auto< to >ON<. This setting allows the provider
or the local network to assign the DNS automatically. If >NO< has been set it is
required to enter primary and secondary DNS subsequently (available from pro-
vider or system administrator of the local network).
Fig. 8-56
Manually entering DNS
NivuSonic CO - Rev. 00 as of 08.12.2010
Page 75
Summary of Contents for NivuSonic Clamp On
Page 109: ...18 Declaration of Conformity...
Page 110: ......
