Instruction manual
NivuSonic Clamp on
®
1. Select your unit on >www.nivus.com< using the access portal.
2. The portal will “wake up” the unit sending a direct call (ring).
3. The NivuSonic CO is setting up Internet access logging in to the portal
subsequently.
4. The portal is going to establish a connection between unit and user using
the internal NivuSonic CO web server.
Fig. 6-21
Communication via Internet
6.6.3 Communication Setup and Connection via Access Portal
Setting up an Internet communication for one or several NIVUS flow meas-
urement units requires an initial setup by NIVUS or a company which is
authorised by NIVUS
Setting up a modem connection (analog, ISDN,GPRS or similar) will cause
communication expenses depending on the connection chosen. Please ob-
serve while transmitting data.
NAfter the initial setup has been finished successfully following units, which are
equipped with the same transmission system, can be set up by the customer or
the customer’s system administrator.
Starting the Internet connection requires a Portal. This Portal is available on the
NIVUS homepage.
To start communication enter the following address in your Internet Explorers
www.nivus.de or www.nivus.com
The start screen of the NIVUS homepage will appear.
NivuSonic CO - Rev. 00 as of 08.12.2010
Page 35
Summary of Contents for NivuSonic Clamp On
Page 109: ...18 Declaration of Conformity...
Page 110: ......
