Instruction manual
NivuSonic Clamp on
®
NivuSonic CO - Rev. 00 as of 08.12.2010
Page 69
YES
= system parameters will be saved (system errors, error mes-
sages, system ON and OFF events etc.)
Unit system
Select between data storage in metric system (e.g. litres, cubic metres, cm/s
etc.), English system (ft, in, gal/s, etc.) or American system (fps, mgd etc.).
The setting of this parameter does not influence the indication on the display.
Fig. 8-43
Selecting the unit system to be saved
Units
Set the desired storage units for the 3 main memory parameters “Flow“, “Filling
level“ and “Velocity“. Depending on the setting chosen previously various op-
tions are available (see also >Unit system<).
Fig. 8-44
Unit selection
Format of numbers
Here you can choose if data are to be saved with commas or dots as decimal
points (a comma is normally being used in Europe, dots are used in other re-
gions).
Fig. 8-45
Selecting the format of numbers
Summary of Contents for NivuSonic Clamp On
Page 109: ...18 Declaration of Conformity...
Page 110: ......
